Press MENU on the front panel or on the remote control and then use
mode.
1.
Use
/
to select what you want to adjust in the FEATURE menu.
Press ENTER button to select it and then use
2.
3.
When you are satisfied with your adjustment, press MENU to exit the main menu.
VGA Set
Press
/
button and then use ENTER to enter the VGA set menu as below
H-Pos
Press ENTER button to select it and then use
V-Pos
Press ENTER button to select it and then use
Phase
Press ENTER button to select it and then use
Clock
Press ENTER button to select it and then use
Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen
VGA MENU OPTIONS
/
/
to adjust the horizontal position of the picture.
/
to adjust the vertical position of the picture.
/
to adjust the phase of the picture.
/
to adjust the clock of the picture.
/
to adjust
to select the Feature menu in VGA