Scanning Exclusions - NETGEAR STM150 Reference Manual

ProSecure Web/Email Threat Manager STM150 Reference Manual

Scanning Exclusions

To enhance system performance, you may add trusted hosts or connections to this list. The
STM150 will no longer scan these connections based on the specified hosts or ports.
To enter a scanning exclusion rule
1. On the menu, click Global Settings > Scanning Exclusions.
Figure 3-3
2. Enter the IP address (range) in their respective fields. Either the Client IP or the Destination IP
can be left blank depending on what traffic you are excluding.
3. Enter the destination port number in the Port field.
4. Enter a brief description of the rule in the Brief Description field.
5. Click Add.
The rule will now appear in the list and be enabled. Check the Enable box to enable/disable the
rule.
To delete a scanning exclusion rule: click Delete next to the rule you wish to delete.
3-4 Performing System Management Tasks
v1.0, January 2009