BAP Precision S SERIES User Manual page 65

The Camera screen appears. Below the display area are indicators of the current
status.
2. For camera controls such as brightness and zooming, tap Menu.
Menu Items Menu Items Menu Items Menu Items
Mode
Brightness
Resolution
Zoom
White
Balance
Flash
Full Screen
Options
Flicker
Night Mode
NOTE: By default, the display area blanks out and shows the word "Standby" when
the camera has been idle for one minute. To resume, tap the screen.
Three choices:
1.
Normal
2. Burst – Continuous shooting of 5 pictures
3. Timer – 5 second countdown before shooting
Seven brightness levels
Six choices from 160x120 to 2048x1536 (640x480 by
default)
Available choices depend on the resolution.
Five choices from which you can select one that matches the
current light source.
Flash on or off.
Full screen on or off.
Overall settings to the Camera program.
Set to the frequency of the local electrical system (60Hz or
50Hz) for flicker free shooting where electrical lights exist.
On or off. Set to On for shooting in low light situations.
Descriptions Descriptions Descriptions Descriptions
6-9
More Programs