Anaging Your Device; Managing Power; Low Battery Signals And Actions - BAP Precision S SERIES User Manual

Chapter 4 Chapter 4
Chapter 4 Chapter 4
Managing Managing Your Device Managing Managing
This chapter tells you how to effectively manage power, settings, data and programs
of your device.

Managing Power

Managing Power
Managing Power Managing Power
A fully charged battery should provide power for up to 8 hours of use. The operating
time of a fully charged battery depends on how you are using the device. Some
functions, such as using multimedia or operating a SD/MMC card, may consume
the battery power considerably.

Low Battery Signals and Actions

Low Battery Signals and Actions
Low Battery Signals and Actions Low Battery Signals and Actions
CAUTION: When you recharge the battery upon a warning of low power, you
should charge for at least 30 minutes. If you unplug the AC charger soon, you may
not have sufficient battery power for your operation.
You can monitor the battery power by tapping
The remaining power is displayed on a status bar in the Power control panel.
When the battery is low, your device will pop up a warning message and a beep
will sound. You should save your data and recharge the battery immediately upon
a warning of low power; otherwise your device will turn off automatically. You need
to connect the device to external AC power for charging before you can use it again.
Your Device Your Device Your Device
Settings Settings System System
Settings Settings System System
Managing Your Device
Power. Power
Power Power
4-1