1. Manuals
  2. Brands
  3. Check-line Manuals
  4. Test Equipment
  5. FGV-XY
  6. Operating instructions manual

Check-line FGV-XY Operating Instructions Manual

Digital force gauge
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NOTES
- 36-
T
ABLE OF
1.0
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
2.0
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
3.0
Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
3.4 Using The Tracking Function
4.0
Function Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
5.0
Reversing The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.0
Measuring Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.2 Peak Measuring Mode
6.3 Changing Display Units
6.4 Tare
7.0
Comparator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7.1 Memory Setting Mode
7.2 Setting HI Limits
7.3 Settig LO Limits
7.4 Comparator Display
7.5 Comparator Output
8.0
Setting Memory Mode / Recording Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.1 Retting The Memory Mode
8.2 Recording Memory Data
9.0
Reviewing Memory Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9.1 Continuous Mode Memory
9.2 Single Memory Mode
10.0 Clearing The Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
10.2 Clearing All Memory
10.3 No Recorded Data
11.0 USB Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
11.1 USB and Battery Life
0
C
ONTENTS
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FGV-XY and is the answer not in the manual?

Questions and answers

Related Manuals for Check-line FGV-XY

Summary of Contents for Check-line FGV-XY

  • Page 1: Table Of Contents

    NOTES ABLE OF ONTENTS Introduction ........... . 04 1.1 Standard Features 1.2 Accessories Included Overview .
  • Page 2 12.0 External Data Port ..........28 16.0 W ARRANTY 12.1 Pin Assignment...
  • Page 3 15.0 DIMENSIONAL RAWINGS PEAK PEAK ZERO ZERO UNIT UNIT PEAK PEAK ZERO ZERO PEAK PEAK ZERO ZERO PEAK ZERO MEMORY UNIT UNIT UNIT UNIT UNIT POWER REVERSE FGV-10XY 10.00lb/5.000kg/50.00N UNIT POWER MEMORY ZERO PEAK – 34– – 3 –...

  • Page 4: Introduction

    1.0 I 14.0 S NTRODUCTION PECIFICATIONS The all new FGV-XY series force gauge delivers industry-leading value Measuring Modes Realtime, Compression Peak, Tension Peak with an extensive list of features including USB output, reversible display Display Update Rate User Selectable: 1, 2, 3, 5, 10, 20 times per and a rugged metal housing.

  • Page 5: Overview

    13.0 T 2.0 O ROUBLESHOOTING ECHNICAL UESTIONS VERVIEW PEAK ZERO MEMORY UNIT POWER REVERSE FGV-10XY 10.00lb/5.000kg/50.00N 2.1 Main Unit 1. Sensor Shaft Apply your force in line with this threaded shaft, using the included attachments, 2. Display LCD screen is the main information display 3.

  • Page 6: Lcd Display

    2.2 LCD Display Overload Output When the overload condition is triggered, the corresponding overload output turns on. this can be used to stop a motorized test stand, or an alarm to pre- vent damage from accidental overload. When compression overload occurs photo-couple 1 (PC!) turns on, and allows current to flow between pins 8 and 10.

  • Page 7: Battery Management

    3.1 Battery Management IMPORTANT: Use only the AC Adapter supplied with your FGV-XY. do not use a third party adapter. Doing so could cause a fire or shock hazard. 1. To charge your FGV-XY, firmly plug the AC Adapter into the gauge’s power port and then plug...

  • Page 8: Using The Hanger

    WARNING 3.4 Tracking Function The FGV-XY uses a load cell and stain gauge as its force sensor. The sensor is affected by environmental changes, such as temperature and humidity. The Tracking Function , which is active by default, helps to negate the effects of these changes.

  • Page 9: Function Modes

    12.0 E 4.0 F XTERNAL UNCTION ODES To access and modify the function modes, follow this procedure: 12.1 Pin Assignment 1. Make sure that the gauge is powered off 2. Press and hold the ZERO key. 3. While continuing to press and hold the ZERO key, Press and release the POWER key.

  • Page 10: Display Update (F02)

    This function allows you to change the rate at which the display is updated. The USB port allows you to connect your FGV-XY to your PC via the supplied available times are 1, 2, 3, 5, 10 and 20 times a second.

  • Page 11: Response Time

    10.0 C 4.5 Response Time (f05) LEARING THE EMORY The gauges response time function smooths out the gauge’s sampling and 10.1 Clearing The Last Record adjusts the sampling period accordingly. Response times are 3, 20 and 150 msec. 1. The last recorded memory block may be erased by pressing ZERO while viewing the last data point.
  • Page 12 5.0 R EVERSING THE ISPLAY If you have mounted your FGV-XY upside down, or are holding the gauge upside down, the display may be reversed for readability 1. Turn POWER off. UNIT UNIT 2. Press and hold the UNIT key.
  • Page 13 “STd” on the display. The unit will alternate between showing the data block number and the recorded measurement value of 1. Press POWER to turn the FGV-XY on that block. 2. Press ZERO to tare the gauge 3.
  • Page 14 6.4 Tare MEMORY MEMORY NOTE: Press ZERO to reset the measured value. This will allow the gauge to ignore any force currently applied to the sensor shaft. The ignored, or MEMORY tared, force is still counted with regards to the gauge’s overload condition. Overload will occur when the force applied to the sensor shaft exceeds the gauge’s rated capacity by 20%.
  • Page 15 The Comparator function allows you to create conditions for Go/No Go testing. A high (HI) and low (LO) force limit may be set so that the FGV-XY’s display will show when a measurement is not within the HI and LO settings. In addition, UNIT the output port will respond relative to the display.
  • Page 16 9.1 Continuous Mode Memory absolute value of the LO limit. Accessing Memory Data The Comparator function’s limits can be set outside of the FGV-XY’s working 1. Turn the POWER off. range. This may cause unpredictable results, and is not recommended 2.
  • Page 17 ECORDING 1. In the Single Measurement Mode, Press MEM to start the recording. The FGV-XY has three memory modes: The letter M will appear and start blinking. Press M to stop recording. Continuous Memory: Allows the recording of up to 1000 data points. the 2.
  • Page 18 Setting the Memory Mode PEAK PEAK PEAK PEAK PEAK PEAK UNIT UNIT UNIT UNIT UNIT UNIT MEMORY 8.2 Recording Memory Data 8.1 Setting the Memory Mode The following procedures explain how to activate memory recording for each memory mode 1. Turn the POWER off. Continuous Mode: 2.
  • Page 19 ® CHECK LINE • BY ELECTROMATIC Model FGV-XY IGITAL ORCE AUGE ELECTROMATIC CHECK LINE ® • O ., 600 Oakland Ave., Cedarhurst, NY 11516–U.S.A. INSTRUMENTS Operating Instructions • TEL: 516-295-4300 FAX: 516-295-4399...

Table of Contents