Download Print this page

Pyramid TIMETRA SYNC RF 9T1WI Installation Instructions page 2

Ethernet transmitter

Advertisement

TIMETRAX™ SYNC RF ETHERNET TRANSMITTER
Installation Instructions 9T1WI, S9DWXSLAUB
LOCATION
Choose appropriate location to install transmitter. If using a GPS Time Source, allow 50 ft cable reach. If facility is
250,000 sq ft or less, locate the transmitter centrally or in the case of multi-story facilities, locate the transmitter on
the middle floor (see diagram below).
If facility is more than 250,000 sq ft, please contact customer support at 888.479.7264, 8am-5pmEST, M-F to
determine if secondary transmitters are required.
IMPORTANT:
Transmitter must be located indoors in a dry location. Do not install transmitter where people
regularly come within 8in (20cm).
ETHERNET
I2256
Page 2 of 5
888.479.7264
pyramidtimesystem.com

Advertisement

loading

This manual is also suitable for:

Timetra sync rf s9dwxslaub