JVC KW-XG70HM Instructions Manual page 35

Symptom
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
• The iPod does not turn on or does not work.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both this unit and iPod.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
Remedy/Cause
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit (see page 3).
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 19).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.
REFERENCES 35