Toro Greensmaster Flex 1820 Operator's Manual page 15

Figure 16
1. N
EUTRAL
2. Traction drive neutral and
reel drive off
For reel operation, the lever has 2 positions: E
and D . Move the top of the lever to the left
ISENGAGE
then forward to engage the reel and begin mowing.
Push the lever to the right to disengage the reel
and continue forward motion or pull back on it to
disengage both the reel and the traction drive.
Note:
If you release the operator-presence control,
the lever returns to neutral and the machine stops.
g000494
3. Traction drive-engaged
(transport)
4. Traction drive and reel
drive engaged
NGAGE
Service Brake
The service brake (Figure
front side of the handle. Pulling the lever back will
apply the service brake. You must release the brake
before you engage the traction drive.
1. Parking-brake latch
Parking-Brake Latch
The parking-brake latch
service brake. With the service brake engaged, rotate
the parking-brake latch toward the brake handle and
release the service brake onto the latch to hold the
service brake in place. Pull the brake lever to release
it.
On/Off Switch
The on/off switch (Figure
control panel. Move the switch to the O
start the engine and O
Operator-Presence Control (OPC)
The operator-presence control
engaged before engaging the traction lever. Releasing
the OPC during operation returns the machine to
neutral but does not shut off the engine.
15
17) is located on the left
Figure 17
2. Service brake
(Figure 17) is used with the
14) is located on top of the
position to
N
to shut off the engine.
FF
(Figure 14) must be
g016853