Page 2
Thanks for choosing the professional stopwatch Motus Run MT101 with lap and split times measurement, 1/100 second precision and 100 lap memory. To get the most out of your device read this manual carefully and keep it on hand for later reference.
Page 3
MODES Time - Hour, minutes, seconds, date, day, month, year - 12/24 hour format - Dual time - Hourly chime Stopwatch - Measurement and storage of 100 lap and split times - 1/100 second precision - Acoustic and visual signal for fastest lap - Pause function Chrono data - Recall Lap and Split times saved in session files...
TIME Press MODE button and enter TIME mode. Setting - Hold EL/ADJ for a few seconds. - The display shows “ADJUST HOLD” and “TIME- 1” texts flashing - Press MODE button to confirm or ST/SP button to choose “TIME-2” - Hours digit flashes. Press LAP button to decrease the value or ST/SP to increase it - Press MODE to confirm and set minutes - Follow the procedure described above to set...
TIME Dual time Hold LAP button for a few seconds to view second time (T2). The display will show “T2” icon. To switch back to default time (TIME-1) hold LAP button again for a few seconds. STOPWATCH Press MODE button and enter stopwatch mode (CHRO).
Page 7
- Press ST/SP button to pause the stopwatch and press LAP button to restart it. Stop and Data storage Each timing session has to be saved in order to be recalled from “Chrono Data” mode and to start a new session. - Press ST/SP button twice (Pause >...
CHRONO DATA Press MODE button to enter chronograph data mode (CHRO DATA). This mode shows stored sessions (RUN) listed with progressive number and related date. Press LAP button to browse the list of stored sessions. Press ST/SP button to view and browse session data: Lap number / Lap time / Split time >...
ALARM Press MODE button and enter alarm mode. Press LAP button to view the desired alarm (ALM-1 or ALM-2). Press ST/SP button to activate or deactivate the alarm (ON/OFF). When the alarm is activated the display shows icon. Setting - Hold EL/ADJ button for a few seconds. - “ADJUST HOLD”...
PACER Press MODE button and enter pacer mode. Setting - Hold EL/ADJ button for a few seconds. - The display shows “ADJUST HOLD” text and cadence digit flashes. - Press ST/SP button to increase the value or LAP to decrease it. - Press EL/ADJ button to confirm.
CARE AND MAINTENANCE - Do not attempt to disassemble or repair the device. - Protect from extreme heat or cold temperatures, shocks and long time exposure to direct sunlight. Store in a cool and dry place. - Wipe clean with a lightly moistened cloth. Apply mild soap to the area in case of stubborn stains or marks.
- In case of valid warranty claim, the repaired device or a replacement device will be returned free of charge. - For out-of-warranty assistance, refer to your dealer or send the device to your country Distributor. MOTUS is a trademark of DIGI Instruments srl, Italy www.motusport.com MT101-2014.1-EN EN-12...