Thanks for choosing the professional stopwatch Motus Trainer MT38 with lap time measurement and storage at 1/100 second precision. To get the most out of your device read this manual carefully and keep it on hand for later reference. CONTENTS ModEs ................3...
MODES time - hour, minutes, seconds, date, day, month - 12/24 hour format - dual time stopwatch - Measurement of lap times - 1/100 second precision for the first 60 minutes; h:mm:ss precision for the following time - acoustic and visual signal for the fastest lap - pause function Chrono data - record and recall lap times saved in session files...
TIME press ModE button and enter tiME mode. setting - hold lap/rEsEt for a few seconds. - the display shows “hold adJ” and “t1” (time 1) texts flashing. - press ModE button to confirm or start/stop button to choose “t2” (time 2). - hours digit flashes.
STOPWATCH press ModE button and enter stopwatch mode (chrono). - press start/stop button to start the stopwatch. upper line indicates lap timing and lower line shows total elapsed time. - press lap/rEsEt button to mark lap time. upper line flashes showing lap number and lower line the related timing for some seconds.
Page 7
full memory message - “Memfull” when the display shows “Memfull” text during a timing session, it is necessary to delete stored sessions to free memory space. hold lap/rEsEt button for a few seconds. the display shows “clear all” text and all stored data will be deleted, including the current session.
CHRONO DATA press ModE button and enter chronograph data mode (chrono data). this mode shows stored sessions (run) listed with progressive number and related date. Data recall - press lap/rEsEt button to browse the list of stored sessions. - press start/stop button to view and browse session data: lap number / lap time >...
COUNTDOWN TIMER press ModE button and enter countdown timer mode (timer) setting - press lap/rEsEt button for a few seconds. - the display shows “hold adj” text and hours digit flashes. - press start/stop to increase the value or lap/rEsEt to decrease it.
ALARM press ModE button and enter alarm mode (alm). setting - hold lap/rEsEt for a few seconds. - the display shows “hold adj” and hours digit flashes. - press start/stop to increase the value or lap/rEsEt to decrease it. - press ModE button to confirm and set minutes. - press start/stop to increase the value or lap/rEsEt to decrease it.
- Battery type: cr2032 (3V). - use battery type as indicated on this manual and supplied with the device. - do not remove the rubber ring from its place. - do not dispose of batteries in regular household waste. - Batteries have to be properly disposed of according to current local regulations.
- in case of valid warranty claim, the repaired device or a replacement device will be returned free of charge. For out-of-warranty assistance, refer to your dealer or send the device to your country distributor. Motus is a trademark of diGi instruments srl, italy www.motusport.com Mt38-2014.1-EN...