Table of Contents
Advertisement
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
02
INSTALLATION
02.3
Electric connection PA-270
Follow the steps below to make the connection.
Take special care in connecting the support to the required voltage of 12V direct current and not
leaving the cables in areas of passage or with elements in movement, could cause breaks, cuts and
failures in the system.
A
To make the connection, locate the black cable on the back of the stand.
B
Remove the plastic end of the BROWN
(+) and BLUE (-) cables with a wire pe-
eler in order to make the connection.
BE SURE TO HAVE THE POWER SUPPLY LINE PROPERLY PROTECTED AND THAT THE POWER
THROUGH THE LINE IS STABLE.
12
Power cable
12V. CC.
C
Use a power strip and a fl at - blade
srewdriver to connect the BROWN (+)
and BLUE (-) cables next to the ambu-
lance jacks.
Advertisement
Table of Contents
