Table of Contents
Advertisement
• Frequency Measurement
(1) Turn the rotary switch to Hz position.
(2) Insert the black and red test leads into the COM and V/Ω input terminals respectively.
(3) Measure the frequency by touching the probes to the desired test points of the circuit.
(4) Read the measured frequency on the display.
• Turn off
Please set the function switch to OFF position after using.
The Meter enters the "Sleep mode" and blanks the display if the Meter is not used and the input is
inactive for 15 minutes. Press any button to wake the Meter up.
MAINTENANCE
Warning
If the Meter fails, check the batteries first，review this manual to make sure that you are operating
the Meter correctly.
Disconnect test leads before opening the case or the battery door.
To avoid false readings, which could lead to possible electric shock or personal injury, replace the
batteries as soon as the battery indicator "
" appears.
22
Advertisement
Table of Contents
