Table of Contents
Advertisement
Align
Operator's side
❺
Top surface
❺
❼
❽
Table
Align
Multi-layered part
❻
– 4 –
4)
Attaching the oil pan
Fix the oil pan ❺ supplied with the machine on
the table by tightening ten wood screws.
Attach a filter ❻ to the oil pan ❺ as shown in
5)
the figure.
Install filter ❻ so that its multi-layered part is
brought to the right side as observed from you.
Install hinge ❼ on the bed with screw ❽ . En-
6)
gage the hinge with the rubber hinge of the
table. Then, place the machine head on the
machine head support rubber.
Advertisement
Table of Contents
