Advertisement
Quick Links
Advertisement
Related Manuals for Hilti TE DRS-S
Summary of Contents for Hilti TE DRS-S
- Page 1 TE DRSS English Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...
- Page 2 Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...
- Page 3 This symbol is intended to draw special attention to certain points when handling the product. 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
- Page 4 ▶ Wear suitable work clothes. ▶ Use the product only within its specified limits. ▶ To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. ▶ Use an antistatic suction hose in order to avoid electrostatic effects.
- Page 5 3 Description 3.1 Overview of the product English Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...
- Page 6 The dust removal module is not suitable for working on metal. 3.3 Items supplied Dust removal module, operating instructions. You can find other system products approved for your product at your local Hilti Center or online at: www.hilti.group. 4 Technical data TE DRSS...
- Page 7 5.2 Fitting the dust removal module 1. Fit the accessory tool (drill bit or chisel). 2. Adjust the depth gauge so that it does not project beyond the tip of the accessory tool. 3. Fit the dust removal module onto the depth gauge. 4.
- Page 8 1. Slide the dust removal module down and hold it securely. 2. Open the hose connector locking lever and pull the hose off the hose connector. 3. Open the length stop locking lever and pull the length stop off. 4. Pull off the tensioning piece. 5.
- Page 9 5.5 Breaking out the diameter rings 1. Detach the suction head from the dust removal module. 2. Remove the cover from the suction head. 3. Lay the casing of the suction head on a solid surface. 4. Use a screwdriver to break out the desired ribs completely. 5.
- Page 10 • Do not operate the dust removal module if damage is found or if parts malfunction. Have the tool repaired by Hilti Service immediately. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
- Page 11 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 12 English Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...
- Page 13 Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...
- Page 14 Hilti = registered trademark of Hilti Corp., Schaan 20170801 Printed: 09.08.2017 | Doc-Nr: PUB / 5135213 / 000 / 01...