Chevrolet 2008 T Series Owner's Manual page 37

In Canada, the law requires that forward-facing child
restraints have a top tether, and that the tether be
attached.
1. Make the belt as long as needed by tilting the latch
plate and pulling it along the belt.
2. Put the child restraint on the seat.
3. Run the vehicle's safety belt through or around the
restraint. The child restraint instructions will show
you how.
4. Push the latch plate into the buckle until it clicks.
Make sure the release button is positioned so you
would be able to unbuckle the safety belt quickly
if necessary.
5. Tighten the belt by pulling its free end while you
push down on the child restraint. If you are using
a forward-facing child restraint, you may find it
helpful to use your knee to push down on the child
restraint as you tighten the belt.
6. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, unbuckle the vehicle's
safety belt.
1-33