Program Departments - Sharp xe-a130 Manual

Program Departments

Departments are used to classify merchandise and apply group attributes such as taxable
status, on items when they are entered.
Your register comes pre-programmed with all the departments as positive (+) and taxable 1. If
you wish to change a department's status, program as desired following the procedure on page
13.
Program Other Items as Necessary
Your cash register is pre-programmed so that you can use it with minimum setup. To change
the settings, see the appropriate sections.
Departments:
%
key:
-
key:
Receipt number:
Date format :
Time format:
Printing format:
When your register goes into an error state, it displays the error message "e" accompanied with
a warning beep. Clear the error state by pressing the
1.When you enter an over 7-digit number to the department or an over 8-digit number
(79999999) to RA, PO, credit or cheque operation:
c
Press and re-enter a correct number.
2.When you make an error in key operation:
c
Press and operate keys correctly.
3.When you make an entry beyond a programmed entry digit limit:
Check if the entered amount is correct. If correct, check the setting of the entry digit limit.
4.When a subtotal exceeds eight digits (79999999):
c
Press and then press
5.When the number of an item exceeds 3 digits in multiplication entry:
c
Press and re-enter a correct number.
Error Escape Function
When an error or something uncontrollable occurs during transaction entry and you cannot keep
the customer waiting, press
situation and finalize the transaction at that time. Transaction entries until then are registered.
Taxable 1. Positive (+). Preset price: 0.00
Negative (-). Preset rate: 0.00
Preset amount: 0.00
Starting from 0001
ddmmyy
24 hour format
Printing manual VAT amount, journal format, printing date, time, receipt
number, and taxable subtotal, and not printing of subtotal with
When an Error Occurs
L G g
, or
V
twice (following
c
key and take an appropriate action.
to finalize the transaction at that point.
c
when in the error state). You can escape the
Before Operation
S
9