Bowers & Wilkins PX Manual

Wireless headphone

Hide thumbs Also See for PX:

Page 1 Wireless Headphone...
Page 2 PX. PX can be used either wirelessly, to play music streamed from your mobile phone, tablet or computer using Bluetooth wireless technology, or conventionally in “passive” mode connected by a cable to a suitable headphone output.
Page 3: Battery Charging
‘Play/Pause’ and ‘+’. A USB charging socket and connection socket for the audio cable, that enables PX to be used as a passive headphone, is located in the right hand ear piece with a pin-hole reboot button beneath the ear pad.
Page 4: Bluetooth Pairing
4. Switching On and Off To switch PX on slide the power button to the right and hold for 1 second. To switch off slide the power button to the right and hold for 2 seconds. PX will provide audible feedback as it switches on or off.
Page 5 To disconnect a Bluetooth source device from audio cable. Cable connection is useful if the battery PX press the Bluetooth button twice in quick is low or if PX is to be used with a non-Bluetooth succession. This will disconnect all Bluetooth audio source device.
Page 6: Specifications
Specifications Technical features: Digital hybrid noise cancellation Bluetooth 4.1 + EDR (Class 2) CVC2 Smart sensing for Auto Play / Pause / On / Off USB-C Charging and audio interface Rechargeable lithium battery Soft leather memory foamed cushions Fold flat design Bluetooth codecs: aptx- HD Bluetooth Profiles...