Table of Contents
Advertisement
Save
Recall
Group
To make changes to a Channel from an A-16CS:
1
2
3
4
• Select a Channel by pressing its numbered button—the
upper LED will light.
• Rotate the V
volume, to the left to lower the volume
• While the Channel is still selected, you can also change
the Pan setting. Rotate the P
change the position of the Channel in the stereo field.
Muting a Channel
While creating a mix, any Channel or combination of Channels can be
muted. Likewise any Groups that have been created can also be muted.
Unlike the Solo Mode, the changes you make with the M
can be saved as part of a Preset.
To mute a Channel from an A-16CS:
•
Select a Channel (or Group)
•
Press the M
•
The yellow LED in the Channel button lights on both
the A-16CS and A-16R
To unmute a Channel or Group:
•
Select a muted Channel
•
Press the M
•
The yellow LED in the Channel button will go out
Additional Channels can be muted or unmuted by following the same
procedure—first select the Channel, then press the M
Pan and Volume Controls
5
6
7
8
knob to the right to increase the
OLUME
button
UTE
button
UTE
9
10
11
12
knob left or right to
AN
Solo
Mute
13
14
15
16
button
UTE
button.
UTE
In Recall Mode
All Volumes
Zero
Select
Mute
49
Advertisement
Table of Contents
