Table of Contents
Advertisement
To set the beep tone
* Press the Mode button until [bP on or oF] and the BELL icon blink on the LCD.
* Press the up[ ] button or down [ ] button.
* Press the PTT button or MODE button to confirm.
5) Weather alert setting
Alert setting is available in GMRS mode only.
To set the Weather alert receiving mode
* Press the MODE button until the [ AL on or oF ] blinks.
* Press the up[ ] button or down [ ] button to set the alert function.
* While the alert is ON,weather icon will blink both in GMRS and weather mode.
* Weather icon will stop the blinking on the LCD when the alert is OFF.
** While the unit is in GMRS mode,if the alert signal is received,the unit will set to
Weather Radio mode automatically and warning beep tone will generate.
** While the unit is in Weather mode,if the alert signal is received,the unit will generate
the warning beep tone.
6) Vibrator Call
The unit will vibrate when receive the call from other party.
To set the vibrator Call
* Press the Mode button until [Ub on or oF] and the VIB icon blink on the LCD.
* Press the up[ ] button or down [ ] button.
* Press the PTT button or MODE button to confirm.
7) Setting the Transmit Power HI/LO
* HI : 2.0W TX power
* LO : 500mW TX power
To set the TX output power
* Press the MODE button until the [ Po
* Press the up[ ] button or down [ ] button to set the TX power
* Press the PTT button or MODE button to confirm.
* HI or LO will appear on the LCD.
** If the battery is in low condition,the TX Power will be switched to LO automatically.
eventhough the TX power is set to HI.
8) Roger tone
This feature will give the tone signal to other parties when transmitting finished
(when PTT button is released.)
To activate or disable the Roger tone
* Press the Mode button until [rb on or oF] and the roger icon blink on the LCD.
* Press the up[ ] button or down [ ] button.
* Press the PTT button or MODE button to confirm.
) Setting the DW(dual watch)
9
To set the DW mode
* Press the MODE button until the [ o
or
] appears.
LO
HI
or 01 up to 15] and DW icon blink on the LCD.
F
8
Advertisement
Table of Contents
