Samsung HG32EE590 Installation Manual page 27

Hotel TV Function
Category Item
Self Diagnosis
for TV
Self Diagnosis for
HTV
System
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
Standby LED
TV Reset
✎ Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS,
and H.Browser.
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
Initial value
Enter Self Diagnosis Menu.
• Picture Test: Use this test when you experience a problem with your TV's picture.
• Sound Test: Use this test when you experience a problem with your TV's sound.
• Signal Information: Show digital broadcasting signal information.
• Reset: Restore all TV settings, excluding network settings, to the factory
defaults.
Use this function to check the statuses of the main functions of Hotel TV.
• STB SI Vendor Setting
‒ Lets you check the state of Pro:Idiom and its communication with the SI
STB or SBB.
‒ If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function.
‒ If "Pro:Idiom DTV Channel Key Loss" appears to have failed and the Pro:Idim
encryption channel has failed to play content, first check the broadcasting
systems related to Pro:Idiom encryption.
‒ If your broadcasting system does not have a problem, contact Samsung
Service.
‒ If STB SI Vendor Setting appears to have failed and communication with
the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or
SBB does not have a problem, contact to Samsung Service.
• RTC
‒ If the time settings doese not match when you turn off and on the TV, use
this function.
‒ If the time settings doese not match, contact Samsung Service.
SW USB Update function
OFF Same function with SVC Service Pattern
ON: TV speaker sound will be mute. Sound will come out through HDMI.
OFF You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Display the web site of related Samsung service center, software version, and Mac
address information.
When the TV is in standby mode, you can configure the settings of external LED.
ON • ON: The LED is on.
• OFF: The LED is off.
Returns all settings on the TV to their factory defaults.
Description
27
English