Summary of Contents for Fisher-Price Hutch/Bookcase
Page 1
IMPORTANT! Please keep these instructions for future reference. Please read these instructions before assembly and use of this product. • Adult assembly is required. • Allen wrench (included) required for assembly. • Product features and decorations may vary from illustrations. •...
Page 2
Part Lists A. Top Panel x1 B. Left Side x1 C. Right Side x1 D. Top Back Rail x1 E. Top Front Rails x1 F. Stationary Shelf x1 H. Back Base Rail x1 I. Front Base Rail x1 G. Adjustable Shelf x1 K.
Page 3
Part Lists HARDWARE AND TOOL DIAGRAM 1" Allen Head Bolt x20 Phillips Head Screw 5/8” x40 Cam Rods x16 Shelf Pegs x4 Cam Lock x16 Iron Plate x 3 1-3/16" Phillips Head Screw x8 Allen Wrench x1 Screw 3/4” x3 Anti-Tip Kit x1 bag (Instruction and Hardware inside) Plastic bag...
Page 4
Furniture Care Instructions Room Climate Control Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment.
Page 5
STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW PROCEDURES ON THE BACK PAGE...
Page 6
Assembly step 1 Cam Rods x 8 C. Right Side x1 B. Left Side x1 Repeat on the Left Side Panel (B). FIGURE 1...
Page 7
Assembly step 2 Cam lock x 8 D. Top Back Rail x 1 E. Top Front Rail x 1 H. Back Base Rail x 1 I. Front Base Rail x 1 FIGURE 2...
Page 8
Assembly step 3 1" Allen Head Bolt x4 F. Stationary Shelf x1 Allen Wrench x1 K. Bottom Panel x1 FIGURE 3...
Page 9
Assembly step 4 1" Allen head bolt x4 Cam lock x8 Allen Wrench x1 B. Left Side x1 FIGURE 4 FIGURE 4...
Page 11
Assembly step 6 1"Allen head bolt x12 Allen Wrench x1 A. Top Panel x1 FIGURE 6...
Page 12
Assembly step 7 5/8” Phillips Head Screw x36 L. Small Back Panel x1 M. Large Back Panel x1...
Page 13
Assembly step 8 Shelf Pegs x4 5/8” Phillips Head Screw x4 G. Adjustable Shelf x1 Step 8: Adjust shelf height to your preference by inserting Shelf Pegs (V) into holes on Side Panels (FIGURE 8A). Rest Adjustable Shelf (G) on Shelf Pegs (V). Secure Adjustable Shelf (G) using 5/8"...
Page 14
Assembly step 9 Screw 3/4” x3 Anti-Tip Kit x1 bag (Instruction and Hardware inside) Iron Plate x3 Plastic bag Note: Please follow instructions in Anti -Tip Kit when assembly is complete. FIGURE 9...