Champion Power Equipment 14560 Owner's Manual & Operating Instructions

Champion Power Equipment 14560 Owner's Manual & Operating Instructions

Atv / utv wireless winch kit 4500 lb. winch

Advertisement

OWNER'S MANUAL & OPERATING INSTRUCTIONS
4500 lb. Winch
ATV/UTV Wireless Winch Kit
MODEL NUMBER
14560
12039 Smith Ave.
SAVE ThESE INSTRUCTIONS
Santa Fe Springs CA 90670
Important Safety Instructions
MADE IN CHINA
USA / 1-877-338-0999
are included in this manual.
REV 14560-20160620
www.championpowerequipment.com

Advertisement

Table of Contents
loading

Summary of Contents for Champion Power Equipment 14560

  • Page 1 OWNER’S MANUAL & OPERATING INSTRUCTIONS 4500 lb. Winch ATV/UTV Wireless Winch Kit MODEL NUMBER 14560 12039 Smith Ave. SAVE ThESE INSTRUCTIONS Santa Fe Springs CA 90670 Important Safety Instructions MADE IN CHINA USA / 1-877-338-0999 are included in this manual. REV 14560-20160620 www.championpowerequipment.com...
  • Page 2: Fcc Statement

    FCC Statement if not installed and used in accordance with the 1. This device complies with Part 15 of the FCC instructions, may cause harmful interference Rules. Operation is subject to the following to radio communications. However, there is no two conditions: (1) This device may not cause guarantee that interference will not occur in a harmful interference.(2) This device must...
  • Page 3 14560 4500 lb. Winch ATV/UTV Wirelss Winch Kit TAbLE OF CONTENTS ........
  • Page 4: Introduction

    INTRODUCTION Introduction Accessories Congratulations on your purchase of a Champion Champion Power Equipment manufactures and Power Equipment winch. CPE designs and builds sells accessories designed to help you get the winches to strict specifications. With proper use most from your purchase. To find out more about and maintenance, this winch will bring years of our covers, tree savers, hooks, fairleads, etc.,...
  • Page 5: Manual Conventions

    14560 ENGLISH MANUAL CONVENTIONS This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. Follow all safety messages to avoid or reduce the risk of serious injury or death.
  • Page 6: Safety Rules

    ENGLISH 14560 SAFETy RULES WARNING WARNING Read this manual thoroughly before operating Do not use the winch to secure or hold a your winch. Failure to follow instructions could vehicle for a long period of time. Do not use result in serious injury or death.
  • Page 7 14560 ENGLISH SAFETy RULES WARNING CAUTION When re-spooling the cable, ensure that the Duration of winching pulls should be kept as cable spools in the under-wind position with short as possible. the cable entering the drum from the bottom, If the motor becomes uncomfortably hot to not the top.
  • Page 8: Controls And Features

    ENGLISH 14560 CONTROLS AND FEATURES Read this owner’s manual before operating your winch. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Winch Motor – 1.6 HP 12V DC motor provides Clevis Hook –...
  • Page 9: Assembly

    14560 ENGLISH ASSEMbLy Assembling the Winch Solenoid/Contactor Location This CPE 4500 lb. (2041 kg) winch is designed Find a location for the solenoid/contactor. It is with a bolt pattern that is standard in this class recommended that the solenoid/contactor be of winch.
  • Page 10: Wiring The Winch

    ENGLISH 14560 ASSEMbLy Wiring the Winch Wiring the Winch (Non-Wireless Use) Cont’d. 6. Splice the end of the red wire on the rocker CAUTION switch, to an ignition (keyed) controlled power source using the supplied wire tap. NEVER route electrical cables across any 7.
  • Page 11 14560 ENGLISH Wiring the Winch (Wireless Use) Cont’d. Wiring the Winch (Wireless Use) Cont’d. 18. Check for proper drum rotation. Pull and 6. Locate the black and green wires running turn the clutch knob to the “OUT” position from the solenoid/contactor to the rocker (free spooling).
  • Page 12: Wiring Diagram

    ENGLISH 14560 ASSEMbLy Wiring Diagram Negative (–) blue yellow Positive (+) black Negative (–) Positive (+) To Switch And Remote Wiring (See Below) Switch Wiring Diagram Green black Ignition Wire...
  • Page 13: Antenna Wiring Diagram

    14560 ENGLISH ASSEMbLy Antenna Wiring Diagram...
  • Page 14: Operation

    Self Recovery Locate a suitable anchor such as a strong tree trunk Your 14560 winch is rated at a 4500 lb. capacity or boulder. Always use a sling as an anchor point. in first layer (max) when spooling the first rope layer on the drum.
  • Page 15: Winching Techniques A-Z

    14560 ENGLISH OPERATION Winching Techniques A-Z Winching Techniques A-Z Cont’d. (a) Take time to assess your situation and plan (p) The vehicle to be winched should be placed your pull. in neutral and the emergency brake released. (b) Put on gloves to protect your hands.
  • Page 16: Maintenance

    ENGLISH 14560 MAINTENANCE Lubrication The owner/operator is responsible for all periodic maintenance. All moving parts within the Electric Winch having been Lubricated using high temperature lithium WARNING grease at the factory. No internal lubrication is required. Lubricate Cable Assembly periodically Never operate a damaged or defective winch.
  • Page 17: Specifications

    14560 ENGLISH SPECIFICATIONS Performance Specifications ........
  • Page 18: Parts Diagram

    ENGLISH 14560 SPECIFICATIONS Parts Diagram...
  • Page 19: Parts List

    14560 ENGLISH Parts List Part Number Description Part Number Description Motor Assembly - 300019 Washer Ø8, Flat 456100-BF Black Flat 450021 Bolt M8 x 25 450001 Coupling, I 410019 Contactor 450002 Spring,Coupling 400011 Bolt M6 x 25 450003A Coupling, II 250002 Washer Ø6, Flat...
  • Page 20: Troubleshooting

    ENGLISH 14560 TROUbLEShOOTING Problem Cause Solution Motor does not turn on Switch Assembly not connected Insert Switch Assembly all the way into the connector. properly Loose battery cable connections Tighten nuts on all cable connections. Contactor malfunctioning Tap contactor to loosen contacts. Apply 12 volts to coil terminals directly.
  • Page 21: Other Exclusions

    Accessory parts such as starting batteries, and storage Warranty Qualifications covers. Champion Power Equipment (CPE) will register this warranty – Failures due to acts of God and other force majeure upon receipt of your Warranty Registration Card and a copy events beyond the manufacturer’s control.

Table of Contents