Download Print this page

Motorola PMMN4041 User Manual page 7

Public safety speaker microphone

Advertisement

Transmitting
Connecting the PSM to the radio does not disable the radio's
microphone and PTT.
Removing the PSM from the Radio
1. Remove the PSM connector from the radio side
connector.
2. Remember to keep the rubber seal inserted in the
PSM's 3.5 mm jack when a secondary accessory is not
being used.
SERVICE
Other than the replaceable cable assembly, clip and antenna,
the PMMN4041/PMMN4042/PMMN4043/PMMN4047/
PMMN4048/PMMN4049 Public Safety Speaker Microphones
are not repairable. Order replacement PSMs as necessary.
The following optional accessories and replacement parts are
available for order from Motorola's Radio Products and
Services Division (RPSD) or Motorola Accessories &
Aftermarket Division (AAD).
Part Number
4205823V01
3071563L01
3071563L02
3071563L03
PMAE4046A
PMAE4047A
PMAD4087A
PMAD4086A
RLN4885
Table 2
Short swivel clip
30" Straight cord
24" Straight cord
18" Straight cord
PSM UHF Stubby Antenna (403–433 MHz)
PSM UHF Stubby Antenna (430–470 MHz)
PSM VHF Antenna (136–153 MHz)
PSM VHF Antenna (150–174 MHz)
Receive-only foam-covered earbud
5
Description

Advertisement

loading

This manual is also suitable for:

Pmmn4047Pmmn4043Pmmn4042Pmmn4049Pmmn4048