Neousys Technology PCIe-USB380 User Manual page 7

After setting the current for your PCIE-USB380/340 card, you can install the PCIe After setting the current for your PCIE
frame grabber card by following
1. Open the chassis of the host computer and expose the x4 PCI Express slot (or a Open the chassis of the host computer and expose the x4 PCI Express slot (or a Open the chassis of the host computer and expose the x4 PCI Express slot (or a
compatible x16 PCI Express slot). compatible x16 PCI Express slot).
2. If you are going to use the internal USB port, please Install cable fi
You can tighten the cable through fixing hole on PCB. ou can tighten the cable through fixing hole on PCB.
3. Get cable through the chassis (PCIE-USB380 only). Get cable through the chassis
4. Align and insert the golden finger of PCIe-USB380 into the PCI Express slot until it Align and insert the golden finger of PCIe
contacted.
5. Fix the PCIe-USB380/340 to the host computer using with a screw.
the steps listed below.
the internal USB port, please Install cable first (PCIE
to the host computer using with a screw.
USB380 into the PCI Express slot until it's firmly
the PCIe-USB380
rst (PCIE-USB380 only).