Advertisement
Advertisement
Table of Contents
Related Manuals for Marshall Amplification ORIGIN 20
Summary of Contents for Marshall Amplification ORIGIN 20
- Page 1 ORIGIN 20 ORIGIN 50 USER MANUAL...
- Page 2 ENGLISH CONGRATULATIONS ON PURCHASING YOUR MARSHALL ORIGIN AMPLIFIER. THE ORIGIN PROVIDES USEFUL MODERN FEATURES INCLUDING: TILT TONE CONTROL, TO BLEND BETWEEN TWO DISTINCTLY DIFFERENT VOICES, AND AN EMULATED OUTPUT FOR THOSE LOOKING TO RECORD DIRECTLY. WE HOPE YOU ENJOY YOUR NEW ORIGIN AS MUCH AS WE HAVE ENJOYED DESIGNING AND BUILDING IT FOR YOU.
- Page 3 IMPORTANT SET UP INFORMATION: Warning: Before going any further, make 4. Ensure that the volume controls on the sure that your amplifier is compatible 1. When using your Origin with an front panel are set to zero. with your mains electricity supply. If you extension speaker cabinet(s), make have any doubt, please seek help from a sure that the speaker cabinet(s) is...
- Page 4 ORIGIN 20 ORIGIN 50 Available in both 20W and 50W power The combo enclosures and speaker outputs and as either a head or combo, choices have been carefully selected to VALVES VALVES every Origin has been designed to offer bring out the natural valve tone with the...
-
Page 5: Front Panel Functions
ENGLISH ORIGIN HEAD (COMBO SHOWN ON NEXT PAGE) 1. POWER SWITCH Note: reducing the power output allows 5. MASTER VOLUME 6. TREBLE you to drive the power stage harder at Turns your amplifier on and off. Adjusts output volume. At higher settings, Controls the higher frequency of low volumes. - Page 6 ENGLISH ORIGIN COMBO (HEAD SHOWN ON PREVOUS PAGE) PULL BOOST EQUALISATION OUTPUT HIGH INPUT GAIN TILT BASS MIDDLE TREBLE MASTER PRESENCE OUTPUT POWER 9. TILT 10. GAIN 11. INPUT Adjusts the voice of your Origin from Controls the amount of pre-amp gain Connect your guitar to the amplifier using normal to high treble at the input stage.
-
Page 7: Rear Panel Functions
ENGLISH 1. 16 OHM OUTPUT 2 & 3. 8 OHM OUTPUT 5. FOOT SWITCH 8. MAINS INLET ORI20 and ORI50 head Connect an 8 OHM cabinet using socket Connect a 2-way foot switch Connect your amplifier to the supplied Connect a single 16 OHM speaker cabinet #3, or connect a pair of 16 OHM speaker (PEDL-90016) to control the gain boost mains lead using this socket. - Page 8 WHILST THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME OF PUBLICATION, DUE TO ITS POLICY OF CONSTANT IMPROVEMENT AND DEVELOPMENT, MARSHALL AMPLIFICATION PLC RESERVES THE RIGHT TO ALTER SPECIFICATIONS WITHOUT PRIOR NOTICE. MARSHALL AMPLIFICATION PLC, DENBIGH ROAD, BLETCHLEY, MILTON KEYNES, MK1 1DQ, ENGLAND.
Need help?
Do you have a question about the ORIGIN 20 and is the answer not in the manual?
Questions and answers
I have an Origin 50C and I want to plug an 8Ohm external cabinet into the back. When I do that, it appears that the amplifier disables the 16 ohm output that the onboard speaker is plugged into. Is this safe, or do I have to unplug the internal speaker before using the 8Ohm external speaker?
No, it is not safe. When using an 8 Ohm external cabinet, you must connect it to socket #3 and disconnect the internal speaker. The manual specifies correct speaker connections and emphasizes switching off the amplifier before connecting or disconnecting speaker loads.
This answer is automatically generated