1. Manuals
  2. Brands
  3. Orion Technology Manuals
  4. Security Camera
  5. GST-894i
  6. Quick manual

Orion Technology GST-894i Quick Manual

Hide thumbs Also See for GST-894i:
1
2
3
4

Advertisement

Table of Contents

See also: User Manual

Introduction

This guide provides instructions for installing the Network Camera on your network. For all
other aspects of using the product, please see the User's Manual, available from the Product
CD.
1. Check the package contents against the list below.
2. Install the hardware on page 3
3. Set the IP address on page 3.
IMPORTANT
This product must be installed in compliance with local laws and regulations.

Package Contents

Item
Network Camera
Power Adaptor
Software CD
Quick User Guide
Accessories

Hardware Overview

Descriptions
IP Dome Camera
Option.
Country specific item.
User's Manual, Utility software
This document
Top Cushion Plate
Bottom Cushion Plate
Both-sided Tape
Anchor : 4pcs
Tapping Screw 4x30 : 4pcs
Hex lobular L-key Wrench
Alarm I/O extension cable
Video monitor cable

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GST-894i and is the answer not in the manual?

Questions and answers

Related Manuals for Orion Technology GST-894i

Summary of Contents for Orion Technology GST-894i

  • Page 1: Package Contents

    Introduction This guide provides instructions for installing the Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, available from the Product 1. Check the package contents against the list below. 2. Install the hardware on page 3 3.
  • Page 2 Hardware Overview...

  • Page 3: Led Indicators

    Making Connection 1. If you have external devices such as sensor or alarms, make connection from connectors. 2. Connect Ethernet cable to make connection to the network hub. 3. Connect power cable to the camera. When you use PoE function, you don’t need to connect power. LED Indicators After applying the power, please check the status LED.
  • Page 4 Web browser connection Note: The Network camera supports Internet Explorer 7 or above. Please check version of your browser and update it if necessary. When you first access the camera you need to download and install an Active-X control from the camera to display a live image. Default User and Password are set to “ADMIN”...

Table of Contents