Power Status Display - JVC GW-SP100U Instructions Manual

Two-piece 4k camera system
Table of Contents

Advertisement

Using AC Power (DC IN Power)
Use a separately sold AC adapter to operate this
unit with AC power.

Power Status Display

RES
Display Screen
100min
Menu Screen
Memo :
Since this unit does not work if only one
battery is loaded, battery icon displays the
power status of only the battery with less
amount of charge.
Replace both batteries as soon as possible
when the remaining battery power and time
are low.
If the recommended battery is not used, the
battery mark which indicates the battery level
may not appear.
The remaining battery power and time are
displayed as they are from the battery
information. Accurate data may not be
displayed depending on the battery condition.
( ⇒ P66 [Tally Lamp] )
( ⇒ P67 [Warning Tone] )
Memo :
If you continue to use the camera system
while the power warning is displayed, the
camera recorder will stop automatically when
the battery or supplied voltage from the AC
adapter becomes lower.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gw-sp100e

Table of Contents