Onkyo CR-N775D Instruction Manual page 43

> Before Start > Part Names
Update
You will not be able to select "Update" if there is no firmware update.
∫ via Network
Press ENTER to select when you want to update the firmware via network.
∫ via USB
Press ENTER to select when you want to update the firmware via USB.
Web Setup
You can make Wi-Fi connection settings using a web browser on a computer. Be sure
your computer is connected to the router wirelessly.
If this unit is connected to the router using ethernet cable, you can not do this setting.
1. Turn the unit on.
2. Press on the remote controller, select "Wi-Fi" in "Network" - "Connection Type",
then select "Wi-Fi Setup".
3. Press 3/4 to select "Use iOS Device" and press ENTER.
4. In the list of wireless LAN connections on your computer, select SSID of this unit
(softap_0009B0xxxxxx).
0 "xxxxxx" in SSID is the lower three bytes of the MAC address.
5. Open the web browser on your computer and access http://192.168.200.1.
6. The "Web Setup" menu is displayed. Make network settings for this unit.
0 Depending on the equipment being used or connection environment, this function
may not work.
0 Consult the appropriate operating instructions for information regarding operation
of the computer.
0 Since this kind of connection is not encoded, a minor security risk may be involved.
> Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
43
En