Table of Contents
Advertisement
After Washing
Remove the plastic bags and tape, and clear
the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle operation.
Start the engine and run it for 5 minutes.
Ensure adequate ventilation for the exhaust
fumes.
Use a dry cloth to absorb water residue. Do
not allow water to stand on the machine as
this will lead to corrosion.
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil free brake disc
cleaner.
Unpainted Aluminum Items
Items such as brake and clutch levers must
be correctly cleaned to preserve their
appearance.
Use a proprietary brand of aluminum cleaner
which does not contain abrasive or caustic
elements.
Clean aluminum items regularly, in particular
after use in inclement weather, where the
components must be hand washed and dried
each time the machine is used.
Warranty
claims
due
maintenance will not be allowed.
Maintenance and Adjustment
Cleaning of the Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance. These
instructions can be applied to chrome,
brushed stainless steel and carbon fiber
components alike.
Note:
•
The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Prepare a mixture of cold and mild
automotive cleaner. Do not use a highly
alkaline
commercial car washes because it leaves a
residue.
Wash the exhaust system with a soft cloth. Do
not use an abrasive scouring pad or steel
wool. They will damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the exhausts.
Drying
Dry the exhaust system as far as possible with
a soft cloth. Do not run the engine to dry the
system or spotting will occur.
Protecting
When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
to
inadequate
surface.
soap
as
commonly
found
at
101
Hide quick links:
Advertisement
Table of Contents
