Advertisement
3.
Assemble
1.
Place the Keypad Gasket followed by the Bluetooth
Keypad 27213 into the Weather Cover, aligning the center
hole and mounting holes. Pass the keypad wire pigtail
through the center holes.
2.
To attach the Keypad to the weather cover, insert the (4)
#10-32 x ½ flathead screws into the mounting holes in the
Weather Cover exterior as shown.
3.
Place the Weather Cover Gasket over the back of the
Weather Cover with the wires from the Keypad passing
through the center of the Keypad Cover Gasket.
Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260
©2017 Master Lock Company LLC | All Rights Reserved.
Weather Cover Gasket
8
Weather Cover
Keypad Gasket
Bluetooth Keypad
P57672
REV A
Advertisement
