Advertisement
6.
Configure
Note: For the Keypad to function, the Door Controller must be
powered and setup in ACS. Consult the Door Controller
Installation and User Manual for instructions.
1. With the Master Lock Vault Enterprise App open on your
mobile device, wake the Keypad by touching the face of
the keypad. The Keypad will light and the LED will
illuminate blue.
2. The Controller name will appear as a selectable option in
the app. Select the controller
3. Use the App to unlock the door. This will pass the config
to the controller
7.
Test
Verify the Keypad operation by testing credentials
1. Wake the Keypad by touch the keypad surface and
present a valid credential using the App or entering a
TAC on the keypad.
2. Verify that the Keypad responds as expected according
to the chart on Page 9.
Installation is now complete.
For more information about system configuration or use, please
consult the ACS Software User Manual and Door Controller
Installation and User Manual, or consult your System
Administrator.
Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260
©2017 Master Lock Company LLC | All Rights Reserved.
10
P57672
REV A
Advertisement
