Advertisement
7/32" (.218)
1.00
The Tools list and provided hardware is suitable for use with installations on metal surfaces. Different tools and hardware
(not provided) may be required for proper installation on other mounting surfaces.To ensure proper mounting, use hardware
type and sizes that are suitable for your specific installation.
Product Notice:
This product is not intended or rated for use in life-critical control applications. Please verify requirements for your specific
installation by consulting electrical code and other local regulations and obtain approvals in writing.
FCC: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260
©2017 Master Lock Company LLC | All Rights Reserved.
ø
4 Places
ø
2.625
Tools & Materials
Safety Glasses
Hearing Protection
Gloves or Similar Hand Protection
Tape Measure (1/16" graduations)
Pencil
ESD Approved Vacuum
Automatic Center Punch
14.88
5.25
1.75
3.50
7/32" (.218") Drill Bit
19/64" (.297") Drill Bit
Cordless Drill (1/2")
Step Drill Bit
Nutsert Install Tool and Bits
#10-24 Tap
#10 Flat head Screw Driver
#10 Hex Driver
5
1.86
P57672
REV A
Advertisement
