Genaray ESDS-25 User Manual page 18

MODIFYING THE LIGHT OUTPUT
The brightness of the Escort ranges
from 10 (10% brightness) to 99 (full
brightness). To set the brightness of
the fixture, follow these steps:
1. Turn on the power. The dimmer value
will show the last brightness setting.
2. Touch and hold the Plus ( ) or Minus ( )
buttons to increase or decrease the value.
Tap either button to raise or lower
the value by one-unit increments.
Since the ESDS-25 and ESDF-75 are
daylight balanced, the color temperature
stays at a constant 5600 K.
18
Escort LED Lights - USER MANUAL
ADJUSTING THE COLOR
TEMPERATURE (ESBF-75 ONLY)
To change the color temperature of
the ESBF-75, follow these steps:
1. Tap once on the Mode ( ) button. The
color temperature value will blink.
2. Use the Plus ( ) and Minus ( ) buttons to
adjust the color temperature from 5600 K
(daylight balance) to 3200 K (tungsten
balance). Tap the buttons to change
the temperature by 100 K increments,
or press and hold to change rapidly.
3. The color temperature setting will stop
blinking, and the color temperature will
be selected after 5 seconds.
You can tap the Set ( ) button to
select the color temperature in case
you want to immediately proceed
to another setting adjustment.