Genaray ESDS-25 User Manual page 16

Led lights, escort series
Table of Contents

Advertisement

Charging the batteries:
The four battery indicator lights each
represent 25% charge. When the
remaining charge is less than 25%, the
bottom light will blink to indicate that
you need to recharge the battery.
1. Place the battery plate onto the
charger by aligning the guide posts
with the slots. Slide the plate onto the
charger in the direction of the arrow.
2. Slide the battery onto the plate so that
the battery and plate contacts touch.
3. Plug the 2-pin plug into the charger
and the other end into an AC outlet. The
indicator will glow red to show that the
battery is charging. It will turn green
when the battery is fully charged.
16
Escort LED Lights - USER MANUAL
Using the cigarette lighter cable:
1. Attach the battery to the charger as
described in the previous section.
2. Plug the cigarette lighter adapter cable
into your car's cigarette lighter, and
attach the 1-pin plug to the charger.
Note
The battery indicator lights may continue
to glow even after the batteries have been
removed from the unit. This is normal and
will not affect the performance of your
Escort LED, the charger, or the batteries.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Genaray ESDS-25

This manual is also suitable for:

Esbf-75Esds-75

Table of Contents