Advertisement
Performance Under Rated Conditions - General
Parameter
Output (two-wire)
Power Supply Voltage Effect
CE Conformity (Europe)
Physical
Parameter
Barrier Diaphragms Material
SMA110
SMA125
SMG170
Process Head Material
SMA110
SMA125
SMG170
Head Gaskets
Meter Body Bolting
Optional Adapter Flange and Bolts
Mounting Bracket
Fill Fluid
Electronic Housing
Process Connections
Wiring
Dimensions
Net Weight
Mounting
Approval Bodies
Hazardous Conditions
-
-
Canadian Registration Number
(CRN)
Pressure Equipment Directive
(97/23/EC)
SMV 3000 Specifications, continued
Analog 4 to 20 mA or digital (DE protocol).
0.005% span per volt.
89/336/EEC, Electromagnetic Compatibility (EMC) Directive.
SS
SS, Hastelloy C, Monel and Tantalum
SS, Hastelloy C,
Carbon Steel (Zinc-Plated) or 316 SS
Carbon Steel (Zinc-Plated), 316 SS, Hastelloy C or Monel.
Carbon Steel (Zinc-Plated), 316 SS, or Hastelloy C.
Glass filled PTFE standard. Viton is optional
Carbon Steel (Zinc plated) standard. Options include 316 SS, NACE A286
SS bolts and 304 SS nuts and B7M.
Adapter Flange materials include 316 SS, Hastelloy 276 and Monel. Bolt
material for flanges is dependent on process head bolts material chosen.
Standard flange material is glass filled PTFE. Viton is optional.
Carbon Steel (Zinc-plated) available in angle or flat style.
Silicone oil or CTFE (Chlorotrifluoroethylene).
Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7
(explosion-proof).
1/4-inch NPT (Option 1/2-inch NPT with adapter).
Accepts up to 16 AWG (1.5 mm diameter).
See Figure 8.
5.3 Kg (11.6 lb)
See Figure 9.
-
Approved as explosion proof and intrinsically safe for use in Class I,
Division 1, Groups A, B, C, D locations, and nonincendive for Class I,
Division 2, Groups A, B, C, D locations. Approved EEx ia IIC T4, T5,
T6 and EEx d IIC T5, T6 per ATEX standards. See attached Model
Selection Guide for options.
-
All ST 3000 amd SMV 3000 model designs, except STG19L, STG99L,
STG170, STG180, have been registered in all provinces and territories
in Canada and are marked CRN: 0F8914.5C.
The ST 3000 pressure transmitters listed in this Specification have no
pressurized internal volume or have a pressurized internal volume rated
less than 1,000 bar (14,500 psig) and/or have a maximum volume of less
than 0.1 liter. Therefore, these transmitters are either; not subject to the
essential requirements of the directive 97/23/EC (PED, Annex 1) and shall
not have the CE mark, or the manufacturer has the free choice of a module
when the CE mark is required for pressures > 200 bar (2,900 psig).
Description
Description
34-SM-03-01
Page 17
Advertisement
