Download Print this page

Acom PC–100W Operating Manual page 6

Hide thumbs Also See for PC–100W:

Advertisement

Scale works by battery when not in using AC power, please read carefully for
the best condition of rechargeable battery, while scale is being worked by
battery the designator "BATT" is indicated
1. First operation from delivery
The battery may be exhausted during a long delivery or other reasons,
please charge the battery fully.
2. Charging times
Times for a full charged battery are 11 hours with scale turned on and 15
hours with scale turned off. When you use a scale out door it is
recommended charge the battery after message "Lo-bAt" (low battery)
3. Voltage indication
Scale indicates a voltage either turned on by power switch or restarting from
stand by mode by " * " key
4. Warning voltage
The battery exhausted to lower level then scale warns "Lo-Bat" with beep
sound three times, this means battery will work a few hours more, please
charge the battery
5. Power down voltage
If the scale is left after a message "Lo-Bat" for a long time then scale will put
power down mode itself, at this moment turn off power switch immediately
and commence the charging battery
6. Stand by mode
Scale is left without weighing or key input for a time which has been set to
waiting time then scale will jump into the stand by mode in order to saving a
battery power and scale will wake up by pressing " *" key, waiting time is
programmable.
Using Battery (optional)
6

Advertisement

loading