Table of Contents
Advertisement
24
www.electrolux.com
A
N 560-568 mm
A 592 mm
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
13.3 Installing the oven under a
work surface
Before the installation, connect the oven
to the electrical supply. Refer to
"Electrical connection".
During installation in
combustible matter, NIN
SEV 1000 and fire protection
guidelines and regulations of
the Association of Cantonal
Fire Insurance shall be
strictly adhered to.
1. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
2. Push the appliance into the recess.
A = appliance, N = recess
180
mm
A
115 mm
N min.
550 mm
A 567
20
mm
mm
A
B
~50
mm
A
A 595
mm
N
585-592 mm
442
mm
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
When installing next to a wood-
fuelled boiler, a heat-proof and heat-
insulating plate must be mounted at
the height of the appliance and at
least 30 cm deep.
13.4 Electrical connection
Use a power cable of H05VV-F or higher.
Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must
include an isolating device with at least a
3 mm-contact separation to enable a
simultaneous and all-pole cut off from the
mains (according to NIN SEV 1000). The
customer must have a socket for the
A
A
180
mm
115 mm
A 567
20
mm
mm
N 560-568 mm
A 592 mm
A
WARNING!
If service is required always
disconnect the appliance
from the power supply.
B
~50 mm
N 600
mm
A 595
mm
442 mm
N min.
550 mm
min. 20 mm
B
10
mm
A
20 mm
Advertisement
Table of Contents
