Electrical Requirements - Morphy Richards total control Instruction Manual

FP403040MEE Rev1.qxp_Morphy Richards Instruction Book 11/07/2016 17:38 Page 3
1
2
15
might damage the cable.
• The mains cable should reach from the socket to the base unit
without straining the connections.
• The power cord cannot be replaced. Contact Morphy Richards for
advice.
Other safety considerations
• Do not use the appliance for anything other than its
intended purpose.
• The use of attachments or tools not recommended or sold by
Morphy Richards may cause fire, electric shock or injury.
• WARNING: Misuse of appliance could cause personal injury.
1
2
3
4
5
Rear of the Base Unit
16
6
7
8
9
10
11 12 13 14
Product specific safety
• IMPORTANT: Allow hot liquids to cool before adding to the
blender, always ensure the lid is fitted correctly.
• Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to sudden steaming.
• Do not use the appliance if the plastic jug or lid is damaged or
has visible cracks.

Electrical requirements

Check that the voltage on the rating plate of your
appliance corresponds with your house electricity supply which
must be A.C. (Alternating Current).
Should the fuse in the mains plug require changing,
a 5 amp BS1362 fuse must be fitted.
WARNING:This appliance must be earthed.
g
f
d
p
i
q
}
∂
3