Download Print this page

Charging The Player - AGPtek S12 User Manual

Waterproof music player

Advertisement

Files transfer
Connect it to the computer by the USB cable, the mp3
player will show up as a removable disk as soon as the
computer recognize it and then just drag files onto the mp3
player.
Note: If your computer cannot recognize the player, the
USB cable may has some problem, please use another USB
cable to connect it to your PC.

Charging the player

Charge the player by the attached USB cable, plug it into
the earphone jack and charge for about 1.5 hour until both
the red and blue light stays on.
Help and Troubleshooting
● Can't turn on the player
- Please check whether the player is run out of battery,
connect the player to a adapter and try again after
charging.
(When you connect the player to a computer, both the red
and blue lights turn on, then stays blue, and then red and
blue lights stay on if computer recognizes player).
● Can't hear any sound from the player
- Please check if the volume is set to 0;
- Please check if the earphone is in poor contact with the
player.
- Please check if the music format is supported;

Advertisement

loading