Table of Contents
Advertisement
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless
Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 162.
Wi-Fi Advanced Settings
The Advanced Wi-Fi menu allows you to set up many of your
device's advanced Wi-Fi services.
1. From the Home screen, tap
Connections
Wi-Fi.
2. Press
Advanced.
The following options are available:
• Network notification: alerts you when a new WAP is available.
• Passpoint: allows you to connect to passpoint-enabled Wi-Fi
Access Points automatically. Touch and slide the slider to the
right to turn it on
• Keep Wi-Fi on during sleep: allows you to specify when to
disconnect from Wi-Fi.
• Check for Internet service: Checks if Wi-Fi internet service is
available when connected to an AP (Access Point).
"By accessing this document, the recipient agrees and acknowledges that all contents and information
in this document (i) are confidential and proprietary information of Samsung (ii) shall be subject to
the non-disclosure agreement regarding Project J and (iii) shall not be disclosed by the recipient to
any third party. Samsung Proprietary and Confidential"
Settings
.
• Auto connect: allows you to be automatically connected to an
AT&T Wi-Fi Hotspot as soon as your phone detects it.
• MAC address: view your device's MAC address, required
when connecting to some secured networks (not configurable).
• IP address: view your device's IP address.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for Wi-Fi
Direct.
1. From the Home screen, tap
Connections
Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON
3. At the bottom of the Wi-Fi screen, tap the Wi-Fi Direct
button.
4. Repeat steps 1 - 3 on the other device you want to
connect with. The steps on a different model of phone,
may be different.
5. On your phone, tap Scan.
Settings
.
Connections
162
Advertisement
Table of Contents
