Honeywell Lyric LCP300-L Quick Installation Manual page 4

Add Add Additional Programming Options Add itional Programming Options itional Programming Options itional Programming Options
Install Installing ing Z Z Z Z - - - - Wave Wave® ® ® ® Home Automation Home Automation Devices
Install Install ing ing Wave Wave Home Automation Home Automation
1) Install Z-Wave devices including Light Modules, Door locks, Thermostats, etc. Refer to the Lyric Gateway
Installation & Reference Guide for detailed programming information.
2) Smart Scenes are User programmable functions and can be programmed via remote services or locally. Refer
to the Lyric Gateway User Reference Guide for detailed programming information.
Adding Cameras Adding Cameras Adding Cameras Adding Cameras
The Lyric Gateway supports up to eight video cameras, when viewed on the MyHome Gateway app. Refer to the
Lyric Gateway User Reference Guide and the camera's installation instructions to connect cameras.
Assigning Users Assigning Users
Assigning Users Assigning Users
Assign additional Users and User Codes, as applicable, via AlarmNet 360.
Test Test Test Testing ing the System ing ing the System the System the System
Enter Test mode (Walk Test) Enter Test mode (Walk Test) Enter Test mode (Walk Test) Enter Test mode (Walk Test) (via MyHome Gateway app)
1) At the Master User screen, select the "Advanced" button.
2) Select "Walk Test". The system enters Walk Test Mode and "Walk Test-Home To Quit" is displayed
3) Open each protected door and window and listen for the programmed chime for each device at the Gateway,
followed by the zone's Voice Descriptor (if programmed). Identification of each faulted protection point
should appear on the display, and clear when the door or window is closed.
4) Walk in front of the motion sensor and listen for the programmed chime and the zone's Voice Descriptor (if
programmed).
5) When testing is complete, select the Home button and enter the Master User Code.
6) Press each key on the wireless key to confirm it performs its assigned function.
Programming Default Programming Defaults/Options s/Options
Programming Default Programming Default s/Options s/Options
The following table provides an overview of the Programming Fields, Options and Defaults, as viewed via the AlarmNet
360 App. Shaded fields are not programmable.
Programming Field Programming Field Programming Field Programming Field
Communicator Communicator
Communicator Communicator
City ID
CS ID
Sub ID
Advanced Protection Logic
Supervision
High Usage Plan
Communications Path
(Internal Device)
Old Alarm Time
IP Fault Time
Use DHCP
NIC IP Address
Subnet Mask
Gateway IP Address
DNS Server IP Address
Cellular Fault Time
Cellular 24 Hr Test/UL864
Comm. Fire
Cellular Rollover
System System
System System
Alarm Report Delay
Burglary Alarm Sound
Daylight Savings Time
Time Zone Offset
Software Version
Temperature Unit
Installer Language
User Language
Two-way Voice
Z-Wave Support
Display Alarm Cancel
Lack of Usage Notify
RF Jam
Devices and Program and Programming
Devices Devices and Program and Program
(via MyHome Gateway app) (via MyHome Gateway app) (via MyHome Gateway app)
Options Options Options Options
01-99
01-FE
0001-9999
Yes, No
None, Daily, 30 Days
Yes, No
IP, Cellular, Cellular and IP
10 Minutes, 15 Minutes, 30 Minutes, 1 Hour, 2 Hours, 4
Hours, 8, Hours, 12 Hours, 24 Hours
1 – 99 Minutes
Yes, No
Up to 12 digits (Viewable only unless DHCP is disabled)
Up to 12 digits (Viewable only unless DHCP is disabled)
Up to 12 digits (Viewable only unless DHCP is disabled)
Up to 12 digits (Viewable only unless DHCP is disabled)
1 – 99 Minutes
Yes, No
Yes, No
No delay, 15 Seconds, 30 Seconds, 45 Seconds
Yes, No
Yes, No
XX.XX.XXXXX.XXX (Viewable only)
Fahrenheit, Celsius
English
English
(Programmed via AlarmNet 360)
Yes, No
Yes, No
Usage Not Monitored, 1 Day, 7 Days, 27 Days, 90 Days,
180 Days, 365 Days
Disabled, RF Jam Log, RF Jam Log and Report
ming Smart Smart Scene Scenes s s s
ming ming Smart Smart Scene Scene
- 4 -
LCP300 LCP300- - - - L L L L LCP300 LCP300- - - - LC
LCP300 LCP300 LCP300 LCP300
Default Default Default Default
Blank
Blank
Blank
Yes
Daily
No
IP
10 Minutes 10 Minutes
60 Minutes 60 Minutes
Yes
255.255.255.255 255.255.255.255
255.255.255.255 255.255.255.255
255.255.255.255 255.255.255.255
255.255.255.255 255.255.255.255
60 Minutes 60 Minutes
No
Yes
30 Seconds
Yes
Yes
(UTC-5:00 Eastern (UTC-5:00 Eastern
Time (US & Canada) Time (US & Canada)
XX.XX.XXXXX.XXX XX.XX.XXXXX.XXX
Fahrenheit Fahrenheit
English
English
No
Yes
Yes
Usage Not Usage Not
Monitored Monitored
RF Jam Log RF Jam Log
LC
LC LC
Default Default Default Default
Blank
Blank
Blank
Yes
Daily
No
IP
Yes
No
Yes
No Delay
Yes
Yes
English
English
No
Yes
Yes