Serial Number - Metrologic Voyager RF series Quick Configuration Manual

QUICK CONFIGURATION GUIDE
1.- Link MS9530 Voyager RF with Base Station.
-Please read the following barcodes in the required order to fix Voyager RF interface and
complete linking:
1º.-
2º.-
3º.-
4º.-
Read Base Station

serial number.

5º.-
MS9530 Voyager RF Quick Configuration guide
Version: 1.0
Enter configuration
(*) Skip this step if you just want to change the link to another
Base station.
Following parameters are set:
-Base Station serial number :9999999999
-Voyager ID: 1
Ready to read the new Serial number of Base Station to
send data to.
Exit Configuration
(Unit should re-start and link with Base Station)
2
Printed: December 2002
Status: Approved