Valet Mode Programming Procedure - CompuSTAR RS1B-DC3 Product Manual

>>
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
01
Time restriction. Complete next step within 7
seconds.
02
Cycle ignition ON twice [2x OFF/ON] rapidly.
OFF ACC ON START ON
ENGINE
START
STOP
03
Press and release the BRAKE pedal three
times [3x].
04
Parking Light will fl ash once [1x] then will
fl ash twice [2x].
05
Set ignition to OFF position.
OFF OFF ACC ON START
ENGINE
START
STOP
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2017
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
06

Valet Mode Programming Procedure

completed.
>>
To exit valet mode: repeat steps 1 to 5.
RS1B-DC3
PAGE 6 OF 12
• 20170829
www.idatalink.com