Parts included in your Wine Dispensing System
kit:
•
Stopper‐dispensers with no‐drip faucets
•
Gas tubes (short ones)with quick
disconnects
•
Gas Manifold
•
Gas hose (long one)with quick disconnect
•
2 stage pressure regulator
•
Tube clamps
•
Adhesive tapes
HOW TO SET UP YOUR WINE DISPENSING & PRESERVING SYSTEM
You will also need a nitrogen/argon cylinder (not
provided).
STEP 1: Place the stopper‐dispenser onto
each open bottle of wine.
STEP 2: Insert the gas tube provided into
the connect of each stopper‐
dispenser.