Advertisement
BEFORE USING FOR THE FIRST TIME
Read all Important Safeguards and Instruction manual
before using this kettle.
Pour away the very first water boiled with this kettle to
remove any dust and residues from the manufacturing
process.
TO BOIL WATER
1. Remove kettle from the base.
2. Open the lid until it stands vertically. DO NOT BEND LID
FURTHER BACK!
3. Fill with the desired amount of fresh cold water. The kettle
has minimum and maximum markings. Never under-fill or
overfill the kettle.
4. CAUTION / DANGEROUS: Never fill above the MAX line.
Cordless ironing mode:
If you fill above the Max line, boiling water will splash out
of the pouring spout. This can cause severe injuries and
burns.
5. Close the lid.
6. Place the kettle on Power Base.
7. Plug cord into wall outlet.
8. Gently push the On switch upwards. The blue Indicator
Light will turn on and the kettle begins to heat the water.
9. When the water comes to boil, the kettle will turn itself
off automatically. And the on-switch will jump down and
the light will shut off.
10. Lift kettle from the base and pour water out slowly.
CAUTION:
Never try to boil water with the lid open.
Do not leave water standing in the kettle. Discard
unused water.
If the kettle is "ON" without water, the kettle will
automatically turn tself off (the blue indicator light will
be shut off, but the switch will NOT jump back).
Press the switch downward to the complete OFF position.
03
Advertisement
