Advertisement
WARNING for your safety
1.
Do not place on or near a hot gas or electrical burner, or
in a heated oven.
2.
Always fill the kettle first, then set the appliance onto the
power base. To disconnect, remove the kettle from the
power base then remove the plug from the wall outlet
electricity supply.
3.
Always make sure that the lid is closed funding operation.
Scalding may occur if the lid is open during operation.
4.
Extreme caution must be used when moving the kettle
containing hot water.
5.
NOT FOR COMMERCIAL USE.
6.
Never boil water while the lid is open. Water may splash
out of the water. This can cause severe injuries.
7.
Never fill the kettle with any liquid other than water.
8.
Never immerse the kettle in any liquid. Never put the kettle
or it's base in a dishwasher.
READ ALL INSTRUCTIONS BEFORE USING THE IRON
9.
Discard the first filling or boiled water to remove any dust
and residues from the manufacturing process.
10. Never under or over fill the kettle.
11. Never fill the kettle over the MAX line. If you fill above the
MAX line, boiling water will push out of the pouring spout.
This can cause severe injuries and burns.
12. When cleaning, make sire the kettle is cold.
13. Over time the stainless steel cover of the heating element
inside the bottom of the kettle may change color slightly
(this is also known as "boiler scale"). These stains can be
wiped aways with a cloth and mild abrasive. Rinse the
kettle thoroughly with fresh water.
14. Hard water can leave calcium spots inside the kettle. Use
a commercial de-scaling agent to remove and follow the
product manufacturer's instructions. Make sure the
kettle is cold before performing this operation
KEEP OUT OF REACH OF CHILDREN AT ALL TIMES
ELECTRICAL SAFETY WARNING
ELECTRICAL PRODUCTS CAN BE DANGEROUS IF NOT USED
CORRECTLY. TO AVOID RISK OF FIRE, BURN OR ELECTRIC
SHOCK INJURY:
01
Advertisement
