Arm your system in Away Mode
Protect your property using Away Mode when you are leaving the premises.
Normally all sensors must be secure before you can arm in Away Mode, this will be indicated by
the Ready Light being lit a solid green.
If the Ready Light is flashing green then "forced arming" is enabled. This means some sensors are
not secure but you can still arm your security system. Read more about the Forced Arming Feature
on page 9.
If the Status Key is not green press the Status Key to hear what sensors are not secured.
You may arm your system using your user PIN code:
1.
READY
2.
AWAY
3.
USER PIN CODE
4.
To silence the Exit Delay beeping, press the Away Key again and the beeping will stop. This can
also be performed from the UltraConnect app.
STATUS
ENTER
EXIT DELAY BEEPS
‐ 8 ‐
1. Basic Features
Check ready key is green
Check status key is green
Select the Away Mode
Leave the premises