Ok Button - C-Pen ReaderPen Interactive User Manual

R
12. ESET BUTTON: Pressing this button resets the device. It is recommended to use this button only when the device
cannot be turned off properly.
Get started
P
OWER ON
Make sure the product is charged. Press the On/Off button for three seconds to power on ReaderPen (boot sequence
takes about 10 seconds).
L /R H
EFT IGHT AND
Select whether to use the product with left or right hand. Enter Settings\Left/Right-Handed to select. Press OK to confirm and then
Back to get back to Main menu and select function.
Access a function and scan or record e voice memo.
F – T R
UNCTION EXT
Language. Press OK to enter, select language, press OK to confirm. This language selection sets both scan language and
TTS voice/language. ReaderPen is now ready to read text. Scan a text line and listen.
F – D
UNCTION ICTIONARY: Looks up words in dictionaries and shows definition. In Dictionary mode, use navigation
keys to select a dictionary. Scan and check the definition/translation.
F – S
UNCTION AVE
automatically saved upon exit (Back button). Files can be retrieved and listened to at any time, locally, or uploaded to
computer if connected with USB.
F – R
UNCTION ECORDER
speak with normal voice. The OK button toggles Record/Pause. When finished, use Back button to exit. The recording is
automatically saved and can be retrieved and listed to at any time.
5
:
EADER Reads text out loud. To select your language, press Menu button and locate Scan
T F
O ILE: Scan and save text and excerpts from textbooks. Create a new file and scan text. File is
:
Record voice memos. Start recording and position the microphone 5-10 cm from your mouth and
T – V
HE DEVICE IDEO