Warning Messages - DEC GTX5166M Service Quick Reference Manual

Warning Messages

The following is an alphabetic list of error and status messages
which the PhoenixBIOS can generate and an explanation of
each message. Many of the messages below refer to the built in
Setup program.
Message Description
nnnn Cache SRAM nnnn is the amount of system cache in
Passed kilobytes successfully tested.
Diskette drive A error Drive A: is present but fails the BIOS POST
diskette tests. Check to see that the drive is
defined with the proper diskette type in
Setup and that the diskette drive is
attached correctly.
Entering SETUP Starting Setup program
Extended RAM Failed Extended memory not working or not
at offset: nnnn configured properly.
nnnn Extended RAM nnnn is the amount of RAM in kilobytes
Passed successfully tested.
Failing Bits: nnnn The hex number nnnn is a map of the bits
at the RAM address (in System, Extended,
or Shadow memory) which failed the
memory test. Each 1 (one) in the map
indicates a failed bit.
Fixed Disk 0 Failure Fixed disk is not working or not configured
or Fixed Disk 1 properly. Check to see if fixed disk is
Failure or Fixed Disk attached properly. Run Setup to ensure
Controller Failure that the fixed-disk type is correctly
identified.
Incorrect Drive A type Type of floppy drive A: not correctly
run SETUP identified in Setup.
Troubleshooting
continued
4-23