Electrohome DVRC802E User Manual page 55

Recording a TV program
Auto Rewind feature
This VCR will automatically rewind
the tape when the tape has ended
(except during OTR and TIMER
REC). It will also eject the tape.
NOTES:
• If the disc space become full, the
recording is stopped and "Disc is
full" will appear on the screen.
• In the event of a power failure during
DVD recording including OTR and
TIMER REC, the program can not
be recorded on the disc.
When the power resumes, after the
VCR/DVD is turned on, the set
checks the disc to repair the error
which is caused by a power
failure. This checking process may
require a few minutes to about 1
hour according to disc condition.
In this process "SYSTEM ERROR
PLEASE WAIT DISC CHECKING"
will appear on the screen.
2H6P001A[E] P47-60
To stop recording
Press STOP to stop recording.
" " will appear on the screen for about 4
seconds.
NOTE:
When recording onto a DVD, even if STOP is pressed during record-
ing, recording does not stop instantly. Recording may continue for as
long as 1 minute maximum.
To stop recording temporarily
Press PAUSE/STILL to avoid recording
unwanted material.
" " will appear on screen for about 4 sec-
onds.
Press again to resume recording.
NOTES:
• In video recording, the pause function will be released after 5 min-
utes to prevent damage the video tape. The unit will change to the
STOP mode.
• When recording onto a video tape, you can select a recording chan-
nel in the recording pause mode (You cannot change a recording
channel in the DVD recording pause mode.)
Recording one program while watching another
While the unit is recording, press TV/VIDEO to select the TV position.
The "VCR" will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector.
NOTE:
Some cableTV hookups do not permit viewing one channel while re-
cording another. See pages 18, 19.
55
VCR mode
DVD mode
6/28/05, 5:36 PM
55